Monitor de disques S.M.A.R.T (Analysis and Reporting Technology System)
pkg install smartmontools Updating FreeBSD repository catalogue... FreeBSD repository is up to date. All repositories are up to date. The following 1 package(s) will be affected (of 0 checked): New packages to be INSTALLED: smartmontools: 7.1_2 Number of packages to be installed: 1 The process will require 2 MiB more space. 444 KiB to be downloaded. Proceed with this action? [y/N]: y [1/1] Fetching smartmontools-7.1_2.txz: 100% 444 KiB 454.4kB/s 00:01 Checking integrity... done (0 conflicting) [1/1] Installing smartmontools-7.1_2... [1/1] Extracting smartmontools-7.1_2: 100% ===== Message from smartmontools-7.1_2: -- smartmontools has been installed To check the status of drives, use the following: /usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive /usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive /usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive To include drive health information in your daily status reports, add a line like the following to /etc/periodic.conf: daily_status_smart_devices="/dev/ad0 /dev/da0" substituting the appropriate device names for your SMART-capable disks. To enable drive monitoring, you can use /usr/local/sbin/smartd. A sample configuration file has been installed as /usr/local/etc/smartd.conf.sample Copy this file to /usr/local/etc/smartd.conf and edit appropriately To have smartd start at boot echo 'smartd_enable="YES"' >> /etc/rc.conf
Il toujours intéressant de connaître l'état de santé des ses disques dures. 